TransparentWhiteLogo

Australia


New Zealand


Singapore

About Us

WHY EvTEK CHARGERS ARE THE BEST CHOICE

EvTEK Chargers are manufactured in Poland to the highest EU global standards using state-of-the-art technology, safety management systems, engineering and design with component parts from Poland, Germany, France and Switzerland. EvTEK Chargers are without doubt the gold standard in the worldwide market with sales and support across Europe, Australasia and Southeast Asia.

Ultra-Modern Design

  • Sleek Modern design with integrated holder, spiralled cable and a small environmentally friendly eco footprint.

Environmentally friendly

  • EvTek takes the environment very seriously. All packaging is from recycled materials and the majority of the component parts of the charger can recycled and the materials reused in future devices.

EvTEK Chargers are custom made

  • Each charger is assembled manually and involves the composition of previously manufactured sub-assemblies into a complete product.

Power supply

EvTEK will operate with either single phase or three phase power supply. The charger automatically detects the power supply available and will switch to this supply mode. No additional configuration is needed.

WIFI - evTEK HUZZAH PRO CHARGERS

provides the WIFI management of all needed charging functions. You can-:

 

(A) View status of the current, power, energy, time and temperature.
(B) View if the charger is ready, connected, charging or sleeping.
(C) You can pause or resume charging.
(D) You can set the start and stop timer.
(E) You can set session options charging for xx minutes or add the session xxx kwh.
(F) You can view station settings and sensor values.

NOISELESS

Our chargers are silent when turning on and off. This is because of the solid-state relay power switching system. Cheaper products have contact relays that are noisy and tend to surge.

TEMPERATURE CONTROLS AND COOLING SYSTEM

If the temperature exceeds a critical level, then the charger will stop charging and when the temperature reduces the charger will recommence charging. The charger continually monitors the internal temperature of the device controlling the speed of the cooling fan. Operational temperatures range from -30C to 70C. The cooling fan automatically switches on at 40C and at 65C and it will only draw half the amperage capacity. At 68C it will only draw a quarter of the amperage capacity. At 71C the charger will halt as it will be above the critical temperature level.

GROUND MONITORING

The charger checks the earth ground status when the charger is powering up and then constantly monitors for earth ground safety. If it detects that the earth ground connection is lost then charging will instantly stop.

DIRECT CURRENT LEAKAGE GUARD

Our chargers are fitted with the latest 6mDC leakage detection guard, ensuring extra safety during charging. It also reduces your installation costs when installing the charger. Other chargers do not have this protection and if you want this it requires the addition of an expensive RCCB Type B DC Guard to be installed to provide this safety feature.

DIRECT CURRENT (DC) LEAKAGE MONITORING

If DC leakage does occur which is highly unlikely due to the EvTEK DC Leakage Guard then charging immediately stops and every 5 seconds the system automatically checks if the leakage is still occurring. Once the DC leakage has disappeared charging automatically recommences.

VOLTAGE SURGE PROTECTION

If there is a voltage spike then an inbuilt protection device will automatically kick in protecting the device.

OVER CURRENT DETECTION

Whilst not a requirement EvTEK Chargers have included this extra safety feature which prevents uncontrolled charging.

RFID AUTHORISATION

The charger has inbuilt reader software that controls who can and can’t use the charger. This is particularly useful when the charger is used in common parking areas where only specific users can operate the charger.

ADJUSTABLE AMP CAPACITY

This enables the user via WIFI to adjust the charger to the AMP capacity the user wishes. This is particularly useful in situations where the power infrastructure is not sufficient to charge the vehicle with full power or if the user wants to adjust the amperage of the charger to the existing fuse value or just wants to charge the vehicle at a lower amperage.

Weatherproof

Our chargers are designed to endure most extreme weather events with the exception of fire and flood.

CERTIFICATIONS

All EvTEK Chargers have all required EU Certifications.

WARRANTY - EvTEK CHARGERS

Provide a full 2 year warranty as well as technical support and advice throughout Australasia, Southeast Asia and Europe.

LINKS